Banner Materials

Church Banners Are available in 6 different materials
and can be made in virtually any size

Learn more about the banner material that's best for your church project.

Vinyl Church Banner Material

Vinyl Non-Curl Material

15 oz. Vinyl Non-Curl Material
Best Application: Indoor Church Banners

  • Superior non-curl vinyl is the highest quality on the market and has the least possible curling edge
  • Best possible banner graphic clarity. The super smooth surface allows for high resolution banner printing
  • Flexible enough to be used indoor or in low-stress outdoor environments

Recommended banner sizes and finishes:

  • 2' x 6' vertical: the most versatile size with a variety of finishing options including grommets in each of 4 corners for mounting to the Xstand or pole pockets at top and bottom for use with the Indoor 2-sided Banner stand .
  • Roll-Up Banner available in two sizes: 31.5" x 79" graphic size or 47.5" x 79" graphic size
  • 3' x 5' vertical: comes with pole pockets at the top and bottom. Fits on optional Vertical Banner Stand
  • 3' x 3' square: includes grommets in each of 4 corners for hanging with Easy Hang Clips included free
  • Custom banner sizes also available. Limiting dimension is 8' one direction by 164' or any size in between. Example: 24' long by 8' tall (24' x 8'), 8' is the limiting dimension

Click here to view indoor use ideas »
Click here to view horizontal indoor use banners »


Vinyl Material

13 oz. Reinforced Vinyl Material
Best Application: Outdoor Church Banners

  • High quality banner material for outside durability and graphic clarity
  • Printed with vivid, waterproof, fade resistant inks
  • Smooth printing surface with best color and visibility of designs and letters
  • Strong outdoor 13 oz. durable vinyl with nylon cord embedded every eighth of an inch preventing tears and rips. (Even if the banner is ripped or sliced, the cord will prevent the banner from continuing to rip or tear)
  • Flexible use, well built and durable for outdoor environments, quality printing surface for indoor viewing and use

Recommended banner sizes and finishes:

  • 3' x 8', 4' x 8' and larger horizontal: includes grommets in each corner and every two feet. Fits on an optional A-Frame Banner Stand
  • Custom banner sizes also available. Limiting dimension is 10â?? by 164â?? or any size in between. Example: 24' long by 10' tall (24' x 10'), 10' is the limiting dimension

Click here to view outdoor use ideas »
Click here to view horizontal outdoor use banners »


Fabric Church Banner Material

Fabric Material

5.3 oz. Polyester Poplin Fabric
Best Application: Indoor Church Banners

  • Brilliant white fabric
  • Soft hand printing surface gives a luxurious look and feel
  • Fabric hangs well and is virtually wrinkle-free

Recommended banner sizes and finishes:

  • 2' x 6' and 3' x 5' vertical: come with pole pockets at the top and the bottom. Fits on optional Two-sided telescoping Banner Stand.
  • 5' x 8' Wall Banner with pole pockets at the top and the bottom. Optional Rod Kit available.
  • Custom banner sizes available. Limiting dimension is 5' by 122' feet or any size in between. Example: 24' long by 8' tall (24' x 8'), 8' is the limiting dimension

Click here to view church banners »


Sleeve Fabric Material

Double-knit Polyester Sleeve Fabric
Best Application: Indoor Sleeve Banners

  • Wrinkle-free, stretch material is printed using a dye-sublimation technique so colors are rich and bright.
  • Banners can be printed on both sides with the same image.

Recommended banner sizes and finishes:

  • Choice of two sizes: 2' x 6' and 2'7" x 6'7".
  • Sleeve banners are sewn like a pillow case to slide over the Click-it Frames (sold separately) and cling tightly for a wrikle-free, eye-catching results.

Click here to view sizing and use ideas »


Custom Flag Banner

Custom Flag Banner â?? 130 g Polyester
Best Application: Outdoor Church Banners

  • The 130 g knitted polyester meets or exceeds the industry standard for outdoor flags
  • Custom flag banners will be printed using the Dye Sublimation process that meets or exceeds the industry standard for outdoor flags
  • Custom flag banners are printed on one side with about a 90% bleed through of the inks creating a reverse image on the back
  • Sturdy construction but like all outdoor signage, flag banners are affected by long-term exposure to wind and the elements
  • To greatly extend the longevity of both the fabric and the print, it is recommended that, when possible, these flags are taken down and stored inside at night or when not in use.

Click here learn more »


StickUp Church Banner Material

See The Video

Best Application: Indoor Smooth Surface

  • Removable and repositionable banner material
  • Sticks on any smooth surface. No stand required
  • Poly substrate is smooth, providing great color and detail
  • Use in places a typical banner and stand setup would not work like interior and exterior walls and windows
  • Does not shrink, stretch or tear
  • Easy bubble-free application
  • Caution: Too hot or too cold can cause adhesive failure. Texture/bumpy surfaces limit adhesion (i.e., no texture walls or cinder block). The larger the banner the more important the condition exceptions become. Donâ??t let it stick to itself â?? grab a friend to help put it up

Recommended banner sizes:

  • 3' x 3' Square
  • Available in 2' x 6', 2'7" x 6'7", 3'x 5'and 3'x 8'
  • Custom banner sizes available. Limiting dimension is 3' by 100' feet or any size in between. Example: 24' long by 3' tall (24' x 3'), 3' is the limiting dimension

Click here to view sizes, pricing and use ideas for the StickUp banners »


Backlit Film

Best Application: Indoor LightBox

  • A translucent polyester film designed for high quality printing and viewing within a LED LightBox Sign
  • The film is water resistant and suited for areas with high humidity and outdoor applications
  • Translucent backlit film lays flat in a LED LightBox Sign
  • LightBox film is durable under normal usage but as with any printed product surface will scratch if it comes in contact with a sharp object or will crease if bent or folded

Recommended banner sizes:

  • Viewable area is 24" x 36" backlit custom graphic insert displayed in an optional LED LightBox
  • Custom sizes and designs available to use in a window display without LED LightBox. Limiting dimension is 3' by 66' feet or any size in between. Example: 24' long by 3' tall (24' x 3'), 3' is the limiting dimension